Home Publications

Publications

Peer-reviewed Journal Publications (Total: 34, h-index: 29, h10-index: 48, citations 3610 according to Google Scholar)

  1. Farhang B, Tanrikulu A, Ganesh-Ram A, Shayesteh N. Innovative Fabrication Design for In-Situ Martensite Decomposition and Enhanced Mechanical Properties in Laser Powder Bed Fused Ti6Al4V Alloy. International Journal of Engineering Science. In Review
  2. Saghaian SE, Nematollahi M, Toker G, Hinojos A, Shayesteh N, Saedi S, Lu CY, Mahtabi MJ, Mills MJ, Elahinia M, Karaca HE. Effect of hatch spacing and laser power on microstructure, texture, and thermomechanical properties of laser powder bed fusion (L-PBF) additively manufactured NiTi. Optics & Laser Technology. 2022 May 1;149:107680. (IF: 4.939)
  3. Ravichander BB, Mamidi K, Rajendran V, Farhang B, Ganesh-Ram A, Hanumantha M, Shayesteh N, Amerinatanzi A. Experimental investigation of laser scan strategy on the microstructure and properties of Inconel 718 parts fabricated by laser powder bed fusion. Materials Characterization. 2022 Apr 1;186:111765. (IF: 4.537)
  4. Farhang B, Ravichander BB, Ma J, Amerinatanzi A, Shayesteh N. The evolution of microstructure and composition homogeneity induced by borders in laser powder bed fused Inconel 718 parts. Journal of Alloys and Compounds. 2022 Mar 25;898:162787. (IF: 6.371)
  5. Wang P, Yang Y, Shayesteh N. Process modeling in laser powder bed fusion towards defect detection and quality control via machine learning: The state-of-the-art and research challenges. Journal of Manufacturing Processes. 2022 Jan 1;73:961-84. (IF: 5.684)
  6. Ravichander BB, Thakare S, Ganesh-Ram A, Farhang B, Hanumantha M, Yang Y, Shayesteh N, Amerinatanzi A. Cost-Aware Design and Fabrication of New Support Structures in Laser Powder Bed Fusion: Microstructure and Metallurgical Properties. Applied Sciences. 2021 Jan;11(21):10127. (IF: 2.838)
  7. Ravichander BB, Rahimzadeh A, Farhang B, Shayesteh N, Amerinatanzi A, Mehrpouya M. A Prediction Model for Additive Manufacturing of Inconel 718 Superalloy. Applied Sciences. 2021; 11(17), p.8010. (IF: 2.838)
  8. Ravichander BB, Amerinatanzi A, Shayesteh N. Study on the Effect of Powder-Bed Fusion Process Parameters on the Quality of as-Built IN718 Parts Using Response Surface Methodology. Metals. 2020;10(9):1180. (IF: 2.695)
  9. Farhang B, Ravichander BB, Venturi F, Amerinatanzi A, Shayesteh N. Study on variations of microstructure and metallurgical properties in various heat-affected zones of SLM fabricated Nickel–Titanium alloy. Materials Science and Engineering: A. 2020;774:138919. (IF: 6.044)
  10. Dehghanghadikolaei A, Ibrahim H, Amerinatanzi A, Hashemi M, Shayesteh N, Elahinia M. Improving corrosion resistance of additively manufactured nickel–titanium biomedical devices by micro-arc oxidation process. Journal of materials science. 2019;54(9):7333-55. (IF: 4.682)
  11. Shayesteh N, Saedi S, Amerinatanzi A, Hinojos A, Ramazani A, Kundin J, Mills MJ, Karaca H, Elahinia M. Achieving superelasticity in additively manufactured NiTi in compression without post-process heat treatment. Scientific reports. 2019;9(1):41. (IF: 4.997)
  12. Biffi CA, Bassani P, Nematollahi M, Shayesteh N, Amerinatanzi A, Mahtabi MJ, Elahinia M, Tuissi A. Effect of Ultrasonic Nanocrystal Surface Modification on the Microstructure and Martensitic Transformation of Selective Laser Melted Nitinol. Materials. 2019;12(19):3068. (IF: 3.748)
  13. Amerinatanzi A, Mehrabi R, Ibrahim H, Dehghan A, Shayesteh N, Elahinia M. Predicting the Biodegradation of Magnesium Alloy Implants: Modeling, Parameter Identification, and Validation. Bioengineering. 2018, 5(4), 105. (IF: 5.046)
  14. Ashrafi MJ, Amerinatanzi A, Saebi Z, Shayesteh N, Mehrabi R, Karaca H, Elahinia M. Shape memory response of cellular lattice structures: unit cell finite element prediction. Mechanics of Materials. 2018. (IF: 4.137)
  15. Elahinia M, Shayesteh N, Amerinatanzi A, Saedi S, Toker GP, Karaca H, Bigelow GS, Benafan O. Additive manufacturing of NiTiHf high temperature shape memory alloy. Scripta Materialia. 2018;145:90-4. (IF: 6.302)
  16. Shayesteh N, Saghaian SE, Amerinatanzi A, Ibrahim H, Li P, Toker GP, Karaca HE, and Elahinia M. Anisotropic tensile and actuation properties of NiTi fabricated with selective laser melting. Materials Science and Engineering: A. 2018, 724, pp.220-230. (IF: 004)
  17. Ibrahim H, Jahadakbar A, Dehghan A, Shayesteh N, Amerinatanzi A, Elahinia M. In Vitro Corrosion Assessment of Additively Manufactured Porous NiTi Structures for Bone Fixation Applications. Metals. 2018;8(3):164. (IF: 2.695)
  18. Saghaian SE, Shayesteh N, Nematollahi M, Saedi S, Elahinia M, Karaca HE. Mechanical and shape memory properties of triply periodic minimal surface (TPMS) NiTi structures fabricated by selective laser melting. Biol. Eng. Med. 2018;3:1-7. (IF: 2.213)
  19. Saedi S, Shayesteh N, Amerinatanzi A, Elahinia M, Karaca HE. On the effects of selective laser melting process parameters on microstructure and thermomechanical response of Ni-rich NiTi. Acta Materialia. 2018;144:552-560. (IF: 9.209)
  20. Saedi S, Saghaian SE, Jahadakbar A, Shayesteh N, Andani MT, Saghaian SM, Lu YC, Elahinia M, Karaca HE. Shape memory response of porous NiTi shape memory alloys fabricated by selective laser melting. Journal of Materials Science: Materials in Medicine. 2018;29(4):40. (IF: 4.727).
  21. Saedi S, Shayesteh N, Amerinatanzi A, Elahinia M, Karaca HE. On the effects of SLM process parameters on microstructure and thermomechanical response of Ni-rich NiTi SMAs. Acta Materialia. 2017. (IF: 9.209)
  22. Saedi S, Turabi AS, Andani MT, Shayesteh N, Elahinia M, Karaca H. Texture, aging, and superelasticity of selective laser melting fabricated Ni-rich NiTi alloys. Materials Science and Engineering: A. 2017. (IF: 6.044)
  23. Ma C, Andani MT, Qin H, Shayesteh N, Ibrahim H, Jahadakbar A, Amerinatanzi A, Ren Z, Zhang H, Doll GL, Dong Y. Improving surface finish and wear resistance of additive manufactured nickel-titanium by ultrasonic nano-crystal surface modification. Journal of Materials Processing Technology. 2017;249:433-40. (IF: 6.162)
  24. Shayesteh N, Jahadakbar A, Amerinatanzi A, Skoracki R, Miller M, Dean D, Elahinia M. Fixation Release and the Bone Bandaid: A New Bone Fixation Device Paradigm. Bioengineering. 2017;4(1):5. (IF: 5.046)
  25. Ibrahim H, Shayesteh N, Elahinia M. Mechanical and In Vitro Corrosion Properties of a Heat-Treated Mg-Zn-Ca-Mn Alloy as a Potential Bioresorbable Material. Scientific Pages Metallurgical Mater Eng. 2017;1(1):1-7. (IF: N/A)
  26. Amerinatanzi A, Zamanian H, Shayesteh N, Jahadakbar A, Elahinia M. Application of the Superelastic NiTi Spring in Ankle Foot Orthosis (AFO) to Create Normal Ankle Joint Behavior. Bioengineering. 2017;4(4):95. (IF: 5.046)
  27. Ahmadi A, Mirzaeifar R, Shayesteh N, Turabi AS, Karaca HE, Elahinia M. Effect of manufacturing parameters on mechanical properties of 316L stainless steel parts fabricated by SLM: a computational framework. Materials & Design. 2016;112:328-38. (IF: 417)
  28. Shayesteh N, Jahadakbar A, Amerinatanzi A, Elahinia M, Miller M, Dean D. Metallic Fixation of Mandibular Segmental Defects: Graft Immobilization and Orofacial Functional Maintenance. Plastic and Reconstructive Surgery Global Open. 2016;4(9). (IF: 0.608)
  29. Elahinia M, Shayesteh N, Andani MT, Amerinatanzi A, Bimber BA, Hamilton RF. Fabrication of NiTi through additive manufacturing: a review. Progress in Materials Science. 2016;83:630-63. (IF: 48.165)
  30. Esfahani SN, Andani MT, Shayesteh N, Mirzaeifar R, Elahinia M. Independent tuning of stiffness and toughness of additively manufactured titanium-polymer composites: Simulation, fabrication, and experimental studies. Journal of Materials Processing Technology. 2016;238:22-9. (IF: 6.162)
  31. Shayesteh N, Andani MT, Amerinatanzi A, Haberland C, Huff S, Miller M, Elahinia M, Dean D. Metals for bone implants: safety, design, and efficacy. Biomanufacturing Reviews. 2016;1(1):1. (IF: N/A)
  32. Shayesteh N, Skoracki R, Miller M, Elahinia M, Dean D. Three-dimensional printing of stiffness-tuned, nitinol skeletal fixation hardware with an example of mandibular segmental defect repair. Procedia CIRP. 2016;49:45-50. (IF: 1.94)
  33. Jahadakbar A, Shayesteh N, Amerinatanzi A, Dean D, Karaca HE, Elahinia M. Finite Element Simulation and Additive Manufacturing of Stiffness-Matched NiTi Fixation Hardware for Mandibular Reconstruction Surgery. Bioengineering. 2016;3(4):36. . (IF: 5.046)
  34. Andani MT, Shayesteh N, Haberland C, Dean D, Miller MJ, Elahinia M. Metals for bone implants. Part 1. Powder metallurgy and implant rendering. Acta biomaterialia. 2014;10(10):4058-70. (IF: 7.242)

Peer-Reviewed Conference Papers (Total: 26)

  1. Ravichander BB, Favela C, Amerinatanzi A, Shayesteh N. A framework for the optimization of powder-bed fusion process. InBehavior and Mechanics of Multifunctional Materials XV 2021 Mar 22 (Vol. 11589, p. 115890N). International Society for Optics and Photonics.
  2. Ravichander BB, Amerinatanzi A, Shayesteh N. Toward mitigating microcracks using nanopowders in laser powder bed fusion. InBehavior and Mechanics of Multifunctional Materials XV 2021 Mar 22 (Vol. 11589, p. 115890P). International Society for Optics and Photonics.
  3. Ravichander BB, Ye Z, Kan C, Shayesteh N, Amerinatanzi A. Development of ANN model for surface roughness prediction of parts produced by varying fabrication parameters. InBehavior and Mechanics of Multifunctional Materials XV 2021 Mar 22 (Vol. 11589, p. 115890M). International Society for Optics and Photonics.
  4. Srivathsan S, Ravichander BB, Shayesteh N, Swails N, Amerinatanzi A. Investigation of the strength of different porous lattice structures manufactured using selective laser melting. InBehavior and Mechanics of Multifunctional Materials IX 2020 Apr 22 (Vol. 11377, p. 113771B). International Society for Optics and Photonics.
  5. Mamidi K, Talla HK, Ravichander BB, Farhang B, Shayesteh N, Amerinatanzi A. Study on the influence of post-processing parameters over microstructure and metallurgical properties of NiTi alloy. InBehavior and Mechanics of Multifunctional Materials IX 2020 May 18 (Vol. 11377, p. 113770V). International Society for Optics and Photonics.
  6. Rajendran VR, Mamidi K, Ravichander B, Farhang B, Amerinatanzi A, Shayesteh N. Determination of residual stress for Inconel 718 samples fabricated through different scanning strategies in selective laser melting. InBehavior and Mechanics of Multifunctional Materials IX 2020 May 21 (Vol. 11377, p. 1137719). International Society for Optics and Photonics.
  7. Thakare S, Ravichander BB, Swails N, Shayesteh N, Amerinatanzi A. The effect of support structure geometry on surface topography of selectively laser melted parts. InBehavior and Mechanics of Multifunctional Materials IX 2020 Apr 22 (Vol. 11377, p. 113771D). International Society for Optics and Photonics.
  8. Ravichander BB, Farhang B, Swails N, Amerinatanzi A, Shayesteh N. Analysis of the deviation in properties of selective laser melted samples fabricated by varying process parameters. InBehavior and Mechanics of Multifunctional Materials IX 2020 Apr 22 (Vol. 11377, p. 113771A). International Society for Optics and Photonics.
  9. Shayesteh N, Saedi S, Amerinatanzi A, Saghaian E, Jahadakbar A, Karaca H, Elahinia M. Selective laser melting of Ni-rich NiTi: selection of process parameters and the superelastic response. In Behavior and Mechanics of Multifunctional Materials and Composites XII 2018 Mar 22 (Vol. 10596, p. 105960W). International Society for Optics and Photonics.
  10. Shayesteh N, Saedi S, Amerinatanzi A, Jahadakbar A, Saghaian E, Karaca H, Elahinia M. Influence of SLM on compressive response of NiTi scaffolds. In Behavior and Mechanics of Multifunctional Materials and Composites XII 2018 Mar 22 (Vol. 10596, p. 105960H). International Society for Optics and Photonics.
  11. Shayesteh N, Elahinia M, Miller M, Dean D. Enhancement of Bone Implants by Substituting Nitinol for Titanium (Ti-6Al-4V): A Modeling Comparison. In ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems 2014 Sep 8. American Society of Mechanical Engineers.
  12. Rahmanian R, Shayesteh N, Haberland C, Dean D, Miller M, Elahinia M. Load bearing and stiffness tailored Niti implants produced by additive manufacturing: a simulation study. InSPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring 2014 Mar 20. International Society for Optics and Photonics.
  13. Hadi A, Qasemi M, Elahinia M, Shayesteh N. Modeling and Experiment of a Flexible Module Actuated by Shape Memory Alloy Wire. In ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems 2014 Sep 8. American Society of Mechanical Engineers.
  14. Raad B, Shayesteh N, Elahinia M. A numerical simulation of the effect of using porous superelastic Nitinol and stiff Titanium fixation hardware on the bone remodeling. InSPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring 2016 May 13 (pp. 98021T-98021T). International Society for Optics and Photonics.
  15. Amerinatanzi A, Shayesteh N, Jahadakbar A, Dean D, Elahinia M. On the effect of screw preload on the stress distribution of mandibles during segmental defect treatment using an additively manufactured hardware. InASME 2016 11th international manufacturing science and engineering conference 2016 Jun 27. American Society of Mechanical Engineers.
  16. Raad B, Shayesteh N, Elahinia M. A comparison between porous NiTi and Ti-6Al-4V fixation hardware on bone remodeling after a reconstruction surgery. InASME 2016 11th international manufacturing science and engineering conference 2016 Jun 27 (pp. V002T03A001-V002T03A001). American Society of Mechanical Engineers.
  17. Ahmadi A, Shayesteh N, Elahinia M, Karaca HE, Mirzaeifar R. Finite element modeling of selective laser melting 316L stainless steel parts for evaluating the mechanical properties. InASME 2016 11th international manufacturing science and engineering conference 2016 Jun 27 (pp. V002T01A003-V002T01A003). American Society of Mechanical Engineers.
  18. Shayesteh N, Amerinatanzi A, Saedi S, Turabi AS, Karaca H, Elahinia M. Stiffness Tuning of NiTi Implants Through Aging. InASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems 2016 Sep 28 (pp. V001T02A014-V001T02A014). American Society of Mechanical Engineers.
  19. Shayesteh N, Dean D, Miller M, Elahinia M. Improving bone implant success by using nitinol as a substitute for titanium: A modeling comparison. ASME 2014 Smart Materials, Adaptive Structures and Intelligent Systems. 2014.
  20. Amerinatanzi A, Shayesteh N, Ibrahim H, Elahinia M. Evaluating a NiTi Implant Under Realistic Loads: A Simulation Study. InASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems 2016 Sep 28 (pp. V002T03A030-V002T03A030). American Society of Mechanical Engineers.
  21. Amerinatanzi A, Shayesteh N, Ibrahim H, Elahinia M. The Effect of Porosity Type on the Mechanical Performance of Porous NiTi Bone Implants. InASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems 2016 Sep 28 (pp. V002T06A018-V002T06A018). American Society of Mechanical Engineers.
  22. Amerinatanzi A, Zamanian H, Shayesteh N, Ibrahim H, Hefzy MS, Elahinia M. On the Advantages of Superelastic NiTi in Ankle Foot Orthoses. InASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems 2016 Sep 28 (pp. V002T03A026-V002T03A026). American Society of Mechanical Engineers.
  23. Shayesteh N, Jahadakbar A, Elahinia M, Dean D, Miller M. The Effect of Adding Dental Implants to the Reconstructed Mandible Comparing the Effect of using Ti-6Al-4v and Niti Hardware. Intissue Engineering Part A 2015 Sep 1 (Vol. 21, pp. S398-S398). 140 Huguenot Street, 3rd Fl, New Rochelle, NY 10801 USA: Mary Ann Liebert, Inc.
  24. Elahinia M, Shayesteh N, Andani MT, Skoracki R, Valerio I, Miller M, Dean D. Mitigating Implant Failure Through Design and Manufacturing of Nitinol Fixation Hardware. Intissue ENGINEERING PART A 2015 Sep 1 (Vol. 21, pp. S10-S10). 140 Huguenot Street, 3rd Fl, New Rochelle, NY 10801 USA: Mary Ann Liebert, Inc.
  25. Elahinia M, Shayesteh N, Andani MT, Rahmanian R, Walker J, Miller MJ, Dean D. Site-specific Material Properties And The Additive Manufacturing Of Nitinol Musculoskeletal Implants. InTissue Engineering Part A 2014 Dec 1 (Vol. 20, pp. S120-S121). 140 Huguenot Street, 3rd Fl, New Rochelle, NY 10801 USA: Mary Ann Liebert, Inc.
  26. Skoracki R, Miller M, Jahadakbar A, Andani MT, Shayesteh N, Haberland C, Dean D, Walker J, Karaca H, Elahinia M. Additive manufacturing of nitinol fixation hardware for reconstructing mandibular segmental defects. InInternational Conference on Shape Memory and Superelastic Technologies, SMST 2015 2015. ASM International.

Books Chapters (Total :1)

  1. Shayesteh N, Jahadakbar A, Amerinatanzi A, Elahinia M. (2017). Recent Advances in Laser-Based Additive Manufacturing. Laser-Based Additive Manufacturing of Metal Parts: Modeling, Optimization, and Control of Mechanical Properties.

Theses (Total: 2)

  1. Shayesteh N. (2015). Toward patient specific long-lasting metallic implants for mandibular segmental defects. M.A. Thesis, University of Toledo, Toledo, OH.
  2. Shayesteh N. (2018). Effect of in Situ Heat Treatment on Additively Manufactured NiTi Devices. Ph.D. Dissertation, University of Toledo, Toledo, OH.

Issued Patents (Total: 1)

  1. Dean D, Elahinia M, Haberland C, Miller M, Sutradhar A, Shayesteh N, Walker M, Skoracki R (Inventors); Ohio State Innovation Foundation, The University Of Toledo, (Assignee). (2015). “Methods, devices, and manufacture of the devices for musculoskeletal reconstructive surgery”. United States patent application US 15/124,660.